What are the characteristics of CNC bending machine? How to refuel CNC bending machine? The answers to these two questions are as follows.

Characteristics of CNC bending machine;

(1) Direct angle programming with angle compensation function.

(2) Grating ruler real-time detection and feedback correction, full closed-loop control, slider back block and dead block positioning accuracy of 0.02mm.

(3) The upper die adopts fast clamping device, and the lower die adopts wedge deformation compensation mechanism.

(4) With multi-step programming function, it can realize multi-step automatic operation, complete one-time processing of multi-step parts, and improve production efficiency.

(5) The imported hydraulic system with stable performance and compact structure can be selected according to the user's requirements, and the ball screw and synchronous belt drive can be selected for the rear gear.

How to refuel CNC bending machine?

The first refueling is the same as ordinary bending machine. There are small barrels of 20L hydraulic oil and big barrels of 170L anti-wear hydraulic oil. The brand is selected according to the recommendation of the machine tool manufacturer. Small barrel is light, big barrel needs tools.

Open the oil tank cap of the bending machine, clean up the sundries in the oil tank, check whether the oil filter is in good condition, and slowly pour the oil into the oil tank until the oil tank cap is in the place specified in the oil standard. If you can, it's fast and clean to use the tanker. Check the operating instructions of the machine again, and carefully observe whether there is any reducer and other places that need refueling.

Find the lubrication point and lubricate with oil according to the specified lubrication point.